FREE FE EXAM PRACTICE QUESTIONS
Practice Summary
0 of 5 Questions completed
Questions:
Information
You have already completed the practice before. Hence you can not start it again.
Practice is loading…
You must sign in or sign up to start the practice.
You must first complete the following:
Results
Results
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
 B. Fluid properties 0%
 D. Statistics (e.g., distributions, mean, mode, standard deviation, confidence interval, regression and curve fitting) 0%
 FREE CIVIL PRACTICE 0%
 1
 2
 3
 4
 5
 Current
 Review
 Answered
 Correct
 Incorrect

Question 1 of 5
1. Question
A mechanical engineer is testing the ultimate tensile for 42 specimens. The results obtained give a sample mean and variance of 420 MPa and 100 MPa, respectively. The 90% confidence interval for the ultimate tensile strength is most nearly:
CorrectIncorrect 
Question 2 of 5
2. Question
Using the normal distribution graph show, identify the mean and the standard deviation:
CorrectIncorrect 
Question 3 of 5
3. Question
A geotechnical engineering company can purchase a used drilling rig for $90,000 and spend $450 per day on operating costs. The drill rig will have a 5year life with no salvage value. Alternatively, the company can lease a drill rig for $800 per day. How many days per year must the company use the leased drill rig in order to justify its purchase at an interest rate of 8% per year:
CorrectIncorrect 
Question 4 of 5
4. Question
A layer of an unknown fluid contained between two horizontal parallel plates. The separation between the plates is 2.5 mm. The bottom plate is fixed while the upper plate moves horizontally at a velocity of 0.5 m/s when a horizontal force of 0.5 N is applied to it. The effective area of the upper plate in contact with the fluid is 0.15 m^{2}. The dynamic (absolute) viscosity of the fluid (Ns/m^{2}) is most nearly:
CorrectIncorrect 
Question 5 of 5
5. Question
A Mohr’s circle is shown for a point in a physical object that is subjected to plane stress. The angle \(2 \phi\) to the maximum principal stress plane is most nearly:
CorrectIncorrect